JOIN US
How are Atlas C55 turnouts? There have been mixed reviews, but most seem to be negative. Is improving them worth the effort, or should I just build my own turnouts? If so, what’s a good source for C55 rail since Micro Engineering is hard to get ahold of?
Atlas C55 work for me, they do have issues for some people, and me sometime, overall i pleased with their performance. If you can't Micro Engineering rail, you can buy atlas flex track and pull the rails.
Since we're talking switches, What would be a good under table switch that would allow a surface top decoration?
I have been using Atlas code 55 track since 2005 when I started my layout. I have not had any significant problems with them though I have had to replace two due to my errors, not the fault of Atlas. I have in excess of 500 feet of track laid up hill and down dale. I have it laid in curves as small as 16" and as wide as 72". My layout was chronicled in N-Scale Magazine several years ago in a series of 17 parts. I had a large number of photos included in the print articles. You may contact me at: walthuston@earthlink.net
SITEMAP CONTACT US PARTNERS LINKS PRIVACY TRADEMARKS ABOUT NRail © NRail 2022
